RFCs in HTML Format


RFC 1874

                            SGML Media Types

1.      Introduction

   A need exists for the transfer the elements of documents constructed
   using the Standard Generalized Markup Language (SGML) [ISO-8879].
   While the specific details of such transfers are being considered
   general agreement exists on the need to register basic media types
   for the SGML entities not covered by existing types.

   The Standard Generalized Markup Language (SGML) is used to encode
   document structure and a rigorous description of it is left to [ISO-
   8879].  The terms used in the present document attempt to be
   consistent with SGML terminology and usage.

2.       The SGML Media-Types

   There are two media-types for SGML parsable entities, Text/SGML and
   Application/SGML.  Both have the same optional parameters.  Text/SGML
   provides a fallback to Text/Plain for those without SGML capability.
   Senders should base the choice between text and application media-
   types on the entity's content.  Text is suggested for entities that
   would be meaningful to a human being without SGML processing.
   Application/SGML is recommended for all others.






Levinson                      Experimental                      [Page 1]

RFC 1874 SGML Media Types December 1995 2.1. Text/SGML MIME type name: Text MIME subtype name: SGML Required parameters: none Optional parameters: charset, SGML-bctf, SGML-boot Encoding considerations: may be encoded Security considerations: see section 4 below Published specification: ISO 8879:1986 Person and email address to contact for further information: E. Levinson <ELevinson@Accurate.com> The Text/SGML media-type can be employed when the contents of the SGML entity is intended to be read by a human and is in a readily comprehensible form. That is the content can be easily discerned by someone without SGML display software. Each record in the SGML entity, delimited by record start (RS) and record end (RE) codes, must correspond to a line in the Text/SGML body part. SGML entities that do not meet the above requirements should use the Application/SGML media-type. See section 2.3 for a description of the parameters. 2.2. Application/SGML MIME type name: Application MIME subtype name: SGML Required parameters: none Optional parameters: SGML-bctf, SGML-boot Encoding considerations: may be encoded Security considerations: see section 4 below Published specification: ISO-8879 Person and email address to contact for further information: E. Levinson <ELevinson@Accurate.com> Use the Application/SGML media-type for SGML text entities that are not appropriate for Text/SGML. When used, each record start (RS) and record end (RE) character shall be explicitly represented by the bit combination specified in the SGML declaration. The parameters are described in the next section. Levinson Experimental [Page 2]
RFC 1874 SGML Media Types December 1995 2.3. SGML Sub-type Parameters The parameters for the Text/ and Application/SGML subtypes are defined below. charset The charset parameter for Text/SGML is defined in [RFC 1521], the valid values and their meaning are registered by the Internet Assigned Numbers Authority (IANA) [RFC 1590]. The default charset value for all Text content-types is "us-ascii" [RFC 1521]. The charset parameter is provided to permit non- SGML capable systems to provide reasonable behavior when Text/SGML defaults to Text/Plain. SGML capable systems will use the SGML-bctf param- eter. SGML-bctf The SGML-bctf (SGML bit combination transformation format) parameter describes the method used to transform the entity's sequence of constant width binary numbers (called "bit combinations" in [ISO 8879, 4.24]) into the octet stream contained in the MIME body part. Valid values for SGML-bctf are the BCTF notation names defined in Annex C of [ISO-10744] and are reproduced for convenience in the Appendix. The default value is "identity", i.e. perform no transformation. SGML-boot The SGML-boot parameter value is the content-ID of a MIME body part (Application/Octet-stream) that satisfies the requirements of the boot attribute in [ISO-10744]. The Appendix contains a summary of those requirements. The SGML-boot parameter is only applicable if the SGML entity is a document entity. 3. Security Considerations SGML entities contain information to be parsed and processed by the recipient's SGML system. Those entities may contain and such systems may permit explicit system level commands to be execute while processing the data. To the extent that an SGML system will execute arbitrary command strings recipients of SGML entities may be at risk. Levinson Experimental [Page 3]
RFC 1874 SGML Media Types December 1995 Parsable SGML entities may also contain explicit processing instructions for a presentation or composition system; use of such instructions present concerns similar to those of Application/PostScript. 4. References [ISO-8879] Information processing -- 8-bit Single-Byte Coded Graphic Character Sets -- Part 1: Latin Alphabet No. 1, ISO 8859-1:1987. [ISO-8879] ISO 8879:1986, Information processing -- Text and office systems -- Standard Generalized Markup Language (SGML). [ISO-10744] ISO/IEC 10744:1992, Information technology -- Hypermedia/Time-based Structuring Language (HyTime) (as modified by First Proposed Technical Corrigendum, ISO/IEC JTC1/SC18 N5027) [RFC 1521] Borenstein, N., and N. Freed, "MIME (Multipurpose Internet Mail Extensions) Part One: Mechanisms for Specifying and Describing the Format of Internet Message Bodies", RFC 1521, Bellcore, Innosoft, September 1993. [RFC 1590] Postel, J., "Media Type Registration Procedure", RFC 1590, USC/Information Sciences Institute, March 1994. [RFC 1642] Goldsmith, D., and M. Davis, "UTF-7, A Mail-Safe Transformation Format of UNICODE", RFC 1642, Taligent, Inc., July 1994. 5. Author's Address Ed Levinson Accurate Information Systems, Inc. 2 Industrial Way Eatontown, NJ 07724 EMail: ELevinson@Accurate.com Levinson Experimental [Page 4]
RFC 1874 SGML Media Types December 1995 APPENDIX ISO-10744 BCTF Values and Boot Attribute A.1. Bit Combination Transformation Format (BCTF) Values The following list of Bit Combination Transformation Format (BCTF) values is provided as a convenience. The authoritative source is [ISO-10744]. identity Each bit combination is represented by a single octet; this BCTF can be used only for entities all of whose bit combinations have a value not exceeding 255 fixed-2 Each bit combination is represented by exactly 2 octets, with the more significant octet first; this BCTF can be used only for entities all of whose bit combinations have a value not exceeding 65535. fixed-3 Each bit combination is represented by exactly 3 octets, with a more significant octet preceding any less significant octets; this BCTF can be used only for entities all of whose bit combinations have a value not exceeding 16777215. fixed-4 Each bit combination is represented by exactly 4 octets, with a more significant octet preceding any less significant octets. utf-8 Each bit combination is represented by a variable number of octets according to UCS Transformation Format 8 defined in Annex P to be added by the first proposed drafted amendment (PDAM 1) to ISO/IEC 10646-1:1993. utf-7 Each bit combination is represented by a variable number of octets in the range 0 through 127 as described in [RFC 1642]; this BCTF can be used only for entities all of whose bit combinations have a value not exceeding 65535. euc-jp Each bit combination is treated as a pair of octets, most significant octet first, encoding a character using the Extended_UNIX_Code_Fixed_Width_for_Japanese charset, and is transformed into the variable length sequence of octets that would encode that character using the Levinson Experimental [Page 5]
RFC 1874 SGML Media Types December 1995 Extended_UNIX_Code_Packed_Format_for_Japanese char- set. sjis Each bit combination is treated as a pair of octets, most significant octet first, encoding a character using the Extended_UNIX_Code_Fixed_Width_for_Japanese charset, and is transformed into the variable length sequence of octets that would encode that character using the Shift_JIS charset. A.2. The Boot Attribute The body part specified by the SGML-boot parameter contains a sequence of triplets of positive integers separated by white space. The triplets correspond to the described character set portion [IS0- 8879, 13.1.1.2] of the SGML declaration. SGML-boot provides the capability to identify the character set of the document's SGML declaration when it uses significant SGML characters [ibid., 4.298] in the SGML reference concrete syntax [ibid., 13.4] that have a character number [ibid., 4.44] in the document's character set that differs from us-ascii. The default value is "0 128 0", all characters are us-ascii. Notes: (1) The triplet, <dscn noc bscn> has the following meaning. Starting with character number dscn in the us-ascii character set, renumber noc characters starting at bscn and incrementing by one. Thus, 0 128 0, represents the identity mapping. (2) The document's declaration itself may also redefine the significant SGML characters; the boot attribute is intended to bootstrap the SGML system's parse of the declaration.



Back to RFC index

 

Associates:

 



Sponsered-Sites:

Register domain name and transfer | Cheap webhosting service | Domain name registration

 

 

""